3051 intelligent pressure/differential pressure transmitter

An overview,

3051GP intelligent pressure/differential pressure transmitter is a high-precision, miniaturized intelligent instrument produced by foreign technology, which adopts mature capacitive sensor technology, and has the characteristics of good long-term stability and high reliability. By means of digital technology, the temperature and nonlinearity of the sensor are compensated, and the accuracy and range ratio of the sensor are greatly improved. The instrument has a HART communication interface, and can be tested, configured and calibrated in calculation with the specially equipped configuration debugging system, or configured and calibrated on site with the specially equipped hand operator (compatible with Rosemont275).

It is suitable for measuring pressure, differential pressure and absolute pressure of all kinds of liquid, gas and steam.

Main technical parameters of intelligent pressure transmitter

① Technical performance

◆ Use object: liquid, gas or steam

◆ Measuring range: See the table of selection specification

◆ Output signal: 4 ~ 20MavDc, superposition HART protocol digital signal

◆ Power source: 24VDC external power supply (power range 12V ~ 45V)

② Performance indicators

(No migration, 316 stainless steel isolation diaphragm and other standard test conditions.)

◆ Range ratio: 40:1

◆ Precision: The range is 3, 4, 5

◆ ±0.1% of the calibrated range when the range ratio is 1:1 to 10:1

◆ In the range ratio of 10:1 to 40:1, ±0.05 (1+0.1URL/ range) % range

◆ The range is 6, 7, 8, 9, 0

◆ ±0.15% of the calibrated range when the range ratio is 1:1 to 10:1

◆ In the range ratio of 10:1 to 40:1, is ±0.075 (1+0.1URL/ range) % range

◆ Stability: large range of ±0.15%/6 months.

◆ Temperature influence: zero temperature error is ±0.25/55℃ of large range; The total temperature error including zero and range is ±0.5/55℃ for large range

◆ Note: for the range 3, 9, 0 temperature influence error double

◆ Static pressure influence: (when DP type is in linear output) zero error: add static pressure 10MPa, the zero error of range 4, 5 is ±0.25% of the large range, the zero error of range 3, 6, 7, 8 is ±0.5% of the large range. This is the system error, before installation can be adjusted according to the actual static pressure transmitter zero, eliminate this error. (HP type in linear output) zero error: add static pressure 31.2MPa, zero error is less than the large range of ±2.0%. This is the system error, before installation can be adjusted according to the actual static pressure transmitter zero, eliminate this error.

◆ Power supply influence: less than 0.005%/V of the output range.

◆ Vibration influence: in any axial direction, the frequency is 200Hz, the error is ±0.05%/g in the large range.

◆ Load influence: As long as the voltage of the input transmitter is higher than 12V, there is no load influence in the load working area.

◆ Installation position influence: can produce no more than 0.25KPa zero error, can be corrected to eliminate the error, no impact on the range; The measuring body rotates without shadow relative to the flange

③ Structural indicators

1, liquid parts material

◆ Isolation diaphragm: 316 stainless steel, Hastelloy C, Monel and tantalum;

◆ Exhaust/drain valve: 316 stainless steel, Hastelloy C and Monel;

◆ Flange and joint: 316 stainless steel, Hastelloy C, Monel;

O-ring: fluorine rubber, rubber, ethylene-propylene;

2, non-liquid parts materials

◆ Filling liquid: silicone oil or fluorine oil;

◆ Bolt: galvanized carbon steel;

◆ Electrical case: low copper aluminum alloy

O-ring: rubber;

◆ Coating: polyester epoxy resin;

3. Pressure lead connector

◆ flange pressure outlet 1/4-18NPT (taper pipe thread);

◆ connector pressure outlet 1/2-14NPT (taper pipe thread);

◆ Electrical connection: 1/2-14NPT threaded end conduit.

◆ Weight: 3.5g (not including options)